How to Expose AGT Glow Stones in Concrete

Applying AGT™ Professional-Grade Glow Stones into Concrete Surfaces

  1. Pour concrete. 
  2. Bull Float surface. 
  3. Seed AGT™ Glow Stones all over setting concrete surface. 
  4. Use Fresno to cover AGT™ Glow Stones lightly 
  5. Spray apply a concrete retarder.
    For example: Grace Products TopCast™ -Top Surface Etcher.
    http://www.na.graceconstruction.com/product.cfm?mode=c&did=25&id=106 
  6. Follow retarder directions to control etching for desired finish.
  7. Spray off retarder as directed in retarder instructions.
  8. Let cure 
  9. Seal 
  10. Enjoy the GLOW!

 

Disclaimer:
Universal One Corporation provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate use of AGT™ Glow Stones. Individuals receiving this information must exercise their independent judgment in determining its appropriateness for a particular purpose. UNIVERSAL ONE CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, UNIVERSAL ONE CORPORATION WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.