APPLICATION AGT™ GLOW STONES IN POLISHED CONCRETE SURFACE
STEP-1: Pour concrete.
STEP-2:Make it all level using a wood screed.
STEP-3: Hit the sides of the wood mold with a rubber hammer to assist in removing air bubbles from within the concrete.
STEP-4:Once the concrete begins to cure and it is no longer ‘soupy’ - hand apply the AGT™ Glow Stones on to the top of the concrete surface and trowel them in.
STEP-5:Once the concrete has cured. Wet Polish it using wet diamond pads. Start with 100 grit to expose the glow stones and then move to 200 grit and then 400 grit.